Gloss metallic wrap films bear the metallic colors and the high-gloss appearance to provide a colorful and reflective appearance for automobiles. Such films generally consist of a base color layer with a metallic hue and then sealed with a protective gloss lamination. Another potential advantage of using gloss metallic films is that these films are generally non-directional and can therefore be applied without having to align them against the logo on the liner. This helps in attaining an even color distribution across the vehicle body hence making the installation process smoother and more versatile.
For installation, it is advisable to use a soft or a medium squeegee together with a new buffer. The buffer is flexible inasmuch as it can be applied in either wet or dry option as preferred by the installer. If a wet buffer is applied, then adding net soapy water will enable the film to slide better when used in applying the prints. It is necessary to put it using glazing technique and the brush should make rounded movements at 45º to the surface and no other traces. This method ensures that the film goes well on the vehicle’s surface without any air bubble formation or uneven surface.
During the installation process, scratches or wrinkles might be formed but the resistance of gloss metallic films is provided by their self-healing ability. Some scratches on the surface of the film are superficial and can easily be rectified with heat since it triggers the memory effect of the film. Wrinkles can also be treated using heat, which means that the installer will be able to retract the application of the film without causing harm to the material. This aspect makes the installation process more tolerant, and enables the maintenance of the ‘perfect’ surface finish of the film.
In general, stretching the film is not a problem with gloss metallic wraps as they have a very slight tendency to change the color when being stretched. However, excessive utilization of promos is discouraged as it still has an impact on the film’s performance. If overstress does occur the heat can cause the film to regain the memory effects for tension and shape. This flexibility helps to keep the film in perfect condition during the installation process.
Cuts are normal for gloss metallic wraps, as they are important in preserving edge lines. It is also vital to heat them again after installation to allow them to adhere well on the surface and have a long lifespan. Fortunately, the film does not have an issue of increasing extra gloss at this stage, and post heating can be done as desired ending up with the glossy look without any hindrance.
It is not very difficult to maintain gloss metallic wraps. These films are also very easy to clean, and the cleaning process hardly takes much of your time. To protect the metal, any general-purpose vehicle cleaner is safe for use while for that extra gloss, one can apply ceramic coatings. It not only increases the overall useful life of the wrap but also maintains the high-gloss finish for years without fading. This means that proper care will be taken to ensure that the wrap is maintained in good condition and the above vehicle will keep on looking unique.
Through these installation and maintenance guidelines, TeckWrap UK Official guarantees that your gloss metallic wraps give you a great looking and long-lasting car finish. The films are designed to be easy to use, scratch resistant and they look great on vehicles’ surfaces which is why they are ideal for vehicle accessorizing.