Solar Gold (CHM21-HD) Vinyl Wrap

Comfortable and flexible PVC material with silver coating. Suitable for car wrapping (or any other smooth or medium curved surface). It comes with a selection of 14 reflective colors to create a distinctive appearance and improve a car's aesthetics. We recommend using a steam vacuum or IRR heater for installation.

The thickness of the film is 0.11 mm.

The thickness of film with release liner: 0.29 mm

Type of film: Polymeric vinyl film (silver coating) with air-release channels

Series: 180 series

Adhesive: Henkel solvent-based moderate adhesive

Release liner: White silicone-coated paper with double-sided polyethylene coating

Storage period: 3 years if stored at +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, in a clean and dry place.

Indoor life: 4 years when following rules of application and use

Outdoor life: 2 years when following rules of application and use

Application: from +17°С to +25°С, usage from -35°С to +35°С

Dimensional stability: shrinkage less than 0.20%

Plastification: between 23% and 23%-31%

Package: Roll width 152 cm, length 18 m, weight 13 kg

Important note:

The screen's images, colors, and finishes are approximate. For the actual representation of the product, always check the color swatch or order an A4 sample.

 

Rolls from the same production lot number should be used to complete a wrap job, as a slight batch-to-batch variation of color may occur. One needs to handle metalized films carefully, as the appearance of the metalized layer could change upon crumpling, overstretching, and too-strong heating. The film may be scratched during the application or during the day of in-and-out use. Scratching of the film is not covered by warranty.