Purple Flame Vinyl Wrap for a Bold Look

TeckWrap Purple Flame has the chroma of fire and passion, igniting your ambition and determination. Wrap now and ride towards your destination.

With a Rainbow drift collection of these stunning colors, TeckWrap offers color-shifting vinyl wraps, giving your vehicle a unique, stylish finish. As a proud supplier, TeckWrap has many film selections with good conformability and durability. The material is stretchable enough to wrap every edge and recessed area easily. And the adhesive is safe without giving you any trouble when uninstalling. The better thing is that these vinyl wraps from TeckWrap are all high-quality but reasonably priced.

Purple Flame Vinyl Wrap Specifications & Application Guide

Conformable material with stable color pigments. Suitable for complete car wrapping (or any other smooth or curved surface).

The thickness of the film is 0.13mm
The thickness of film with release liner: 0.30mm

Type of film: High-grade polymeric multilayered calendared vinyl film with air-release channels
Width & Length: 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd)
Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry
Release liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double side PE coated Kraft. (ISO 9001, ISO 140001, OHSAS 18001)
Storing period (shelf life): 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, in a clean and dry place.
Durability/Warranty: Datasheet (Click the link)
Application: from +17°С to +18°С, usage from -45°С to +45°С
Dimensional stability: shrinkage less than 3%(matte), 4% (glossy)
Plastification: between 27%-35%
Breaking Strength: 22.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average)
Light Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 5, pass, Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, four h condensation at (50±2.5)℃ BPT, Exposure duration: 49h
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendared films. No overstretching. Post heating
Post-heating temperature: 100℃
Aftercare: PH neutral; avoid wax or solvents 
Directional: yes

Tools: soft squeegees with buffers 

Important note: The screen's images, colors, and finishes are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.